Stuck Controller

General discussion about all things Tooli
Phillip C
Posts: 4
Joined: Sun Jun 26, 2016 3:25 am

Stuck Controller

Postby Phillip C » Tue Jul 26, 2016 2:58 am

When I attempt to load a job into tooli and press the SD card it the machine will just reboot to a "hello" screen and once this has happened the machine no longer communicates if you touch the screen it simply reboots to the "hello" screen. if I leave the machine off for 5 minutes it will reboot normal. I have tried 3 different SD cards as the one it came with never worked.

User avatar
Toolbotics Support
Posts: 55
Joined: Sat Jun 25, 2016 10:29 am

Re: Stuck Controller

Postby Toolbotics Support » Tue Jul 26, 2016 5:11 am

Have you previously been able to run a job from an SD card?

Does Tooli function correctly when performing other tasks, such as seeking limits or using the 'Tap Move' feature? Perhaps test these before using the SD card screen.
Toolbotics Forum Support

Phillip C
Posts: 4
Joined: Sun Jun 26, 2016 3:25 am

Re: Stuck Controller

Postby Phillip C » Tue Jul 26, 2016 11:41 pm

it does it during any function, setting up the system seeking limits ect...

User avatar
Toolbotics Support
Posts: 55
Joined: Sat Jun 25, 2016 10:29 am

Re: Stuck Controller

Postby Toolbotics Support » Wed Jul 27, 2016 2:17 am

Perhaps check all the electrical connections that you made during assembly. If any of the cable plugs are in the wrong sockets, or if the plugs are not oriented correctly, the controller will not function properly.
Toolbotics Forum Support

Phillip C
Posts: 4
Joined: Sun Jun 26, 2016 3:25 am

Re: Stuck Controller

Postby Phillip C » Thu Jul 28, 2016 2:37 am

went through all the wiring and still no change...

User avatar
Toolbotics Support
Posts: 55
Joined: Sat Jun 25, 2016 10:29 am

Re: Stuck Controller

Postby Toolbotics Support » Thu Jul 28, 2016 4:50 am

It's possible that the firmware upload to the controller wasn't 100% successful.

I will email you the firmware and instructions on how to upload it.
Toolbotics Forum Support